​

Chairman of the Mechanical Engineering Dept.

​Dr. Fares R. Al Mushref

• ​PhD: Mechanical & Manufacturing Engineering

• MSc: Mechanical Engineering

• BSc: Mechanical Engineering
  

Publications: 

1. ​The impact of multimodal pore size considered independently from porosity on mechanical performance and osteogenic behaviour of titanium scaffoldsC Torres-Sanchez, M Norrito, FR Almushref, PP ConwayMaterials Science and Engineering: C 124, 112026

2. The effect of pore size and porosity on mechanical properties and biological response of porous titanium scaffoldsC Torres, FR Almushref, M Norrito, K Yendall, Y Liu, P Conway Loughborough University
   

3. The effect of microstructure on the mechanical properties of Ti Scaffolds. IN: Junior Euromat 2016: 13th FEMS Junior EUROMAT Lausanne, Switzerland, 10-14 July 2016F ALMUSHREF, C TORRES-SANCHEZAbstracts E-Book, 31
   

4. The impact of multimodal pore size considered independently from porosity on mechanical performance and osteogenic behaviour of titanium scaffoldsC Torres, M Norrito, FR Almushref, P Conway

​Dr. Elaf N. Mahrous

• ​PhD: Mechanical Engineering, University of Delaware, 2021

• MSc: Mechanical Engineering, KFUPM, 2009

• BSc: Mechanical Engineering, KFUPM, 2006
  

​​Publications: 

​Dr. Ahmed Salem Alghamdi

• PhD: PhD in Mechanical Engineering from The University of Manchester
• MSc: Master's in manufacturing engineering science from International Islamic University Malaysia 
• BSc: Bachelor of Engineering in Manufacturing from International Islamic University Malaysia 
• Other: Teaching Certificate from Durham College, Canada 

​Publications:

1. Ahmed S. AL-Ghamdi and Mohammad Yeakub Ali, Rheological and thermal behavior of high impact polystyrene nanocomposite, Advanced Materials Research Journal (ISSN:1022-6680).
2. Ahmed S. AL-Ghamdi and Mohammad Yeakub Ali, Mechanical Performance and Water Absorption Resistance of HIPS/MWCNTs Nanocomposite, International Conference on Advances in Manufacturing and Materials Engineering Advanced Materials Research Journal.
3. Ahmed Alghamdi and Paul Mativenga, Tool/chip Contact Phenomena for Cutting Tools with Chip Breaker Geometry, Lecture Notes in Mechanical Engineering, MACE PGR CONFERENCE, Manchester/United Kingdom, 26 March 2018
4. Ahmed Alghamdi and Paul Mativenga, Optimisation of Laser Micromachining of multilayer coated cutting tools, The 40th International MATADOR Conference on Advanced Manufacturing, Hangzhou /China, 8^th -10th July 2019
5. Ahmed Alghamdi and Paul Mativenga, Surface Structuring of Multilayer Coated Cutting Tool Using Nd: YVO4 Laser nanosecond laser, Lecture Notes in Mechanical Engineering, 2019
6. Ahmed Alghamdi and Paul Mativenga, Laser micro structuring of multilayer coated carbide tools, The 1st International Conference on Advanced Surface Enhancement (INCASE), Singapore, 10th-12th September 2019

​Dr. Khalid Douhan Alshammari

• ​PhD: Mechanical Engineering, University of Akron, USA, 2019

• MSc: Mechanical Engineering Technology, Purdue University Northwest, USA, 2013

• BSc: Mechanical Engineering Technology, Purdue University Northwest, USA, 2011
  

​publications:

​Dr. Abdullah Alhuzaim

• PhD: Birmingham University

• MSc: Montana Tech University

• BSc: Ferris State University
  

• Other: CWI
  

​Publications: 

​Dr. Ali AlQahtani

• ​PhD: Ph.D. in Mechanical Engineering | University of Birmingham, UK, SEPTEMBER 2017
• MSc: M.S. in Industrial Engineering | University of South Florida, USA, JUNE, 2009
• BSc: BSc in Mechanical Engineering | University of Toledo, USA, OCTOBER, 2008
  

​Publications: 

1.  Alqahtani A. Shokrollahihassanbarough   F.,   Wyszynski   M.L.,   (2015).Thermodynamic Simulation Comparison of AVL BOOST and Ricardo Wavefor HCCI and SI engines optimisation. Combustion Engines. 161(2), 68-72. ISSN 2300-9896 

2. Alqahtani, A. M., Wyszynski, M. L., Mazuro, P. (2016). "Investigation into the effect of bore/stroke ratio on a single cylinder two stroke opposed piston engine." Journal of Kones 23 No 2: 9-16.

3. Alqahtani, A. M., Wyszynski, M. L., Mazuro, P, Xu, H. (2017). Evaluation of the effect of variable compression ratios performance on opposed piston 2-stroke engine. Combustion Engines. 171(4), 97-106. DOI: 10.19206/CE-2017-417 

4. Shokrollahihassanbarough   F.,   Alqahtani   A.,   Wyszynski   M.L.   (2015). Thermodynamic simulation comparison of   opposed two-stroke and conventional four-stroke engines. Combustion Engines. 162(3), 78-84. ISSN2300-9896
   

5. Alqahtani   A,  Jebaraj   S.   (2019).   Experimental   Investigation of the Performance of Vapour Compression Refrigeration System Using Various Refrigerants. RA JOURNAL OF APPLIED RESEARCH. ISSN: 2394-6709.

6. Jebaraj   S.,   Alqahtani   A.   (2019).   Theoretical   Investigation of   the Performance of Vapour Compression Refrigeration System. International Journal of Latest Engineering and Management Research (IJLEMR). ISSN:2455-4847

7. Baseer, M., Alqahtani, A., & Rehman, S. (2019). Techno-economic design and evaluation of hybrid energy systems for residential communities: Case study of Jubail industrial city. Journal Of Cleaner Production, 237, 117806. doi: 10.1016/j.jclepro.2019.117806

8. S Jebaraj, Alqahtani   A .(2021). A review on solar flat plate collectors. Int. Global Energy Issues, Vol. 43, Nos. 2/3

9. S Jebaraj, Alqahtani   A .(2021). A review on performance, heat transfer and exergy analysis of solar flat plate collectors. World Review of Science, Technology and Sust. Development, Vol. 17, Nos. 2/3

​Dr. Sameer R Alghanmi

• ​PhD in Mechanical Engineering
• MSc in Industrial and System Engineering
• BSc in Mechanical Engineering
  

Publications: 

1. Shuqi, Z., Limei, Y., Goyal, V., Alghanmi, S., Alkhalifah, T., Alkhalaf, S., ... & Deifalla, A. (2023). Artificial neural network-based optimization of baffle geometries for maximized heat transfer efficiency in microchannel heat sinks. Case Studies in Thermal Engineering, 103331.
2. Alghanmi, S. (2018). opportunistic maintenance optimization based on stochastic dependence for multi-component system exposed to different failure modes (doctoral dissertation, university of akron).

​Dr. Yasser Ali Alamri

• ​PhD: Doctor of Philosophy, Mechanical Engineering, University of Birmingham, United Kingdom, (2017 — 2022)
• MSc: Master of Engineering, Mechanical Engineering, Portland State University, United State (2013-2015).
• BSc: Bachelor of Engineering Science in Mechanical Engineering, University of Technology Sydney, Australia, (2008 —2012)
• Other: Associate Degree, Electromechanical Engineering Technology, Jubail Industrial College, (2001 — 2004)
  

​Publications: 

Journals: 

1. Albaik, I., Alamri, Y.A., Al-Dadah, R., Elsheniti, M.B, Mahmoud, S., Ismail, M.A., 2022a. "Assessment of a novel multi-generation solar CPV/T system combining adsorption and organic rankine cycle subsystems". Solar Energy,236, Pages 455-472.  https://doi.org/10.1016/j.solener.2022.03.024
2. Alamri, Y.A., Albaik, I., Mahmoud, S., Al-Dadah, R., Ismail, M.A., 2021a. "Integration of concentrated multi-junction solar cells with small-scale organic rankine cycle". Energy Convers. Manag., 239, 114235.  https://doi.org/10.1016/j.enconman.2021.114235
3. Alamri, Y.A., Mahmoud, S., Al-Dadah, R., Sharma, S., Roy, J.N., Ding, Y., 2021b. "OpticalPerformance of Single Point-Focus Fresnel Lens Concentrator System for Multiple Multi-Junction Solar Cells—A Numerical Study". Energies 2021, 14, 4301.  https://doi.org/10.3390/en14144301
   

Conferencs: 

1. Y. Alamri, S. Mahmoud, R. AL-Dadah."Thermal Modelling of Multi-Junction Solar Cells Assembly under Fresnel-Based Concentrator Photovoltaic/Thermal System," 11th International Conference on Applied Energy ICAE2019, Västerås ,Sweden,2019. http://www.energy-proceedings.org/thermal-modelling-of-multi-junction-solar-cells-assembly-under-fresnel-based-concentrator-photovoltaic-thermal-system/
   

Dr. Hamed Saber

• PhD: University of New Mexico, USA (GPA: 4.0/4.0)
• MSc: Mansoura University, Egypt
• BSc: Mansoura University, Egypt (Excellent with honor degree and ranked the first)
  

​Publications: 

​Dr. Ibrahim Abdalla

• PhD: Loughborough University

• MSc: Nairobi University
  

• BSc: Khartoum University

• Other: PGCertHE

​publications: 

​Mr. Dr. Islam Mohamed El-Galy Khalil

• PhD: Dr.-Ing. in Mechanical Engineering, University of Hanover, Germany, 2011
• MSc: MSc in Production Engineering, Alexandria University, Egypt, 2001
• BSc: BSc in Production Engineering, Alexandria University, Egypt, 1996
• Other: Certified Associate Trainer, IBCT, 2017
  

Publications:

1. Z. El Sayed, M. Abd-Alrazzaq, I. El-Galy, "Manufacturing and Characterization of Open-Cell Aluminum Foam Produced via Infiltration of Leachable Space Holder", Materials Science Forum, ISSN: 1662-9752, Vol. 1041, pp 57-65, 2021

2. I. El-Galy, B. Saleh, M. H. Ahmed, "Functionally Graded Materials: Classifications and Development Trends from Industrial Point of View", SN Applied Science, ISSN 2523-3971, Vol. 1, No. 11, p. 1378, 2019

3. G. Nassef, I. El-Galy, A. Hassanin, "Mechanical and Dynamic Characterization of Sustainable Composites Based on Food Packaging Waste", 5th International Conference on Mechanical, Materials and Manufacturing (ICMMM 2018), Orlando, USA, October 13-15, ISSN 2261236x, 2018

4. I. M. El-Galy, B. I. Bassiouny and M. H. Ahmed, "Empirical Model for Dry Sliding Wear Behaviour of Centrifugally Cast Functionally Graded Al / SiCp Composite", Key Engineering Materials, ISSN: 1662-9795, Vol. 786, pp 276-285, 2018

5. El-Galy, I; Hamed, M.; Essa, A., "Modeling and Validation of Residual Stresses in Tube Bending of Strain Hardening Materials", Journal of Engineering and Applied Science JEAS, ISSN 2536-9512, Vol. 65, Issue 3, 2018

6. I. M. El-Galy, A. R. Elmasry, "Experimental and Numerical Simulation for Formability of Tailor-Welded Blanks", International Conference on Materials Science and Engineering: Recent Advances and Challenges  ICMSE-RAC 2018, Alexandria, Egypt, March 11-13, 2018

7. El-Galy, I. M; Hamed, M. H.; Bassiouny, B. S., "Characterization of Functionally Graded Al-SiCp Metal Matrix Composites Manufactured by Centrifugal Casting, Alexandria Engineering Journal, Vol. 56, Issue 4, https://doi.org/10.1016/j.aej.2017.03.009, 2017

8. Ahmed, M. H.; Afifi, H. A.; El-Galy, I. M., "Characterization of Closed-cell Aluminum Foams Produced by Melt-based technique"; 17th International Conference on Applied Mechanics and Mechanical Engineering AMME'17, MTC, 19-21 April 2016, Cairo, Egypt

9. El-Galy, I.; Elmasry, A.; El-Ashram, E., "Numerical Simulation of Welding Dissimilar Steel Sheets for Use in Tailor-Welded Blanks"; International Journal of Advancement in Mechanical and Aeronautical Engineering, Vol. 3, Issue 1, 2016.

10. Shyha, I; Patrick, M.; El-Galy, I., "Machinability analysis when drilling Kovar shape memory alloys"; Advances in Materials and Processing Technologies, Vol. 2, 2015

11. El-Galy, I.; El-Nainay, M; Hassanin, A., "Wireless Acoustic Emission System for Online Monitoring of Industrial Manufacturing Processes"; Industry and Academia Conference IAC2014, Cairo.

12. Afifi, H.; Ahmed, M.; El-Galy I., "Aluminum Foam Production and Characterization based on Calcium Carbonate as an Economical Foaming Agent"; Industry and Academia Conference IAC2014, Cairo, March 2014

13. Behrens, B.-A.; El-Galy, I.; Huinink, T.; Buse, C., "Online Monitoring of Deep Drawing Process by Application of Acoustic Emission"; 10th International Conference on Technology of Plasticity (ICTP) 2011, Steel Research International (Special Edition), pp. 385-389, Aachen, Germany, September, 2011

14. El-Galy Khalil, I., "Application of Acoustic Emission and Signal Analysis Techniques in Monitoring Die Forging Processes of Light Alloys"; Dissertation, Garbsen, PZH, Produktionstechn. Zentrum, XIX, 161 pages, 2011

15. Behrens, B.-A.; Hagen, T.; Knigge, J.; El-Galy, I.; Hadifi, T.; Bouguecha, "A. New Trends in Forging Technologies"; 14th International Conference on Material Forming (ESAFORM), AIP Conf. Proceedings, Vol. 1353, April 2011

16. Behrens, B.-A.; El-Galy, I.; Wager, C.; Schrödter, J.; Olle, P.; Betancur Escobar, S.; Weigel, N.; Bouguecha, A., "Aktuelle Forschungsergebnisse am Institut für Umform­technik und Umformmaschinen"; Tagungsband des 20. Umform­technisches Kolloquium Hannover 2011: Umformtechnik - Innovation aus Industrie und Wissenschaft, S. 35-51, Garbsen, Februar 2011

17. El-Galy, I.; Behrens, B.- A., "Online Monitoring of Hot Die Forging Processes Using Acoustic Emission (Part-II)"; Proceedings of 29th European Conference on Acoustic Emission Testing, Vienna, 8-11 September 2010

18. Bouguecha, A.; El-Galy, I.; Stukenborg-Colsman, C.; Lerch, M.; Nolte, I.; Wefstaedt, P.; Mathias, T.; Behrens, B.-A., "Numerical Investigations of the Strain-Adaptive Bone Remodeling in the Prosthetic Pelvis"; Proceedings of the 29th IFMBE, pp. 562, Chalkidiki, Greece, 27 - 30 May 2010

19. El-Galy, I.; Pfeiffer, I.; Behrens, B.-A., "Application of Acoustic Emission to Monitor Forging Processes of Magnesium Alloys under Superimposed Hydrostatic Pressure"; Material Science and Technology (MS&T09), 23-29 Oct. 2009, Pittsburg, PA, USA

20. El-Galy, I.; Behrens, B.- A., "Online Monitoring of Hot Die Forging Processes Using Acoustic Emission (Part-I)"; International Journal of Acoustic Emission, Vol. 26, Jan.- Dez. 2008

21. El-Galy, I.; Conrads, H.; Behrens, B.-A., "Application of Acoustic Emission for the Online Monitoring of Hot Die Forging Processes (Part I)"; Proceedings of 28th European Conference on Acoustic Emission Testing, Cracow, 17-19 Sept. 2008

22. El-Galy, I.; Krüger-Kronstett, C. Online-Überwachung und Qualitätskontrolle von massiv umgeformten Teilen; Abschlussbericht einer Machbarkeitsstudie, Industrie-verband Massiv­umformung (IMU), German Cold Forging Group (GCFG), 2007

23. El-Galy, I.; Conrads, H. Verschleißvorhersage an Schmiedewerkzeugen; Zeitschrift: Umformtechnik, H. 1, 2007

24. Conrads, H.; El-Galy, I.; Gue, J., "Energiebasierte Verschleißprognose an Schmiede-werkzeugen"; Werkstattstechnik, Springer VDI Verlag, H. 1, 2007
    

​Dr. Jebaraj Sargunam Azariah

• ​PhD: Mechanical Engineering
• MSc: Mechanical Engineering – Thermal Engineering
• BSc: Mechanical Engineering
  

​Publications: 

• International Journal 
  

1. Jebaraj S and Iniyan S (2006), 'A Review of Energy Models', International Journal of Renewable & Sustainable Energy Reviews, Vol.10, pp. 281-311.

2. Jebaraj S and Iniyan S (2006), 'Renewable Energy Programmes in India', International Journal of Global Energy Issues, Vol.26, pp.232-257.

3. Jebaraj S and Iniyan S (2007), 'Forecasting of Commercial Energy Consumption in India Using Artificial Neural Network', International Journal of Global Energy Issues, Vol.27, Issue 3, pp.276 - 301.

4. Jebaraj S and Iniyan S (2007), 'An Optimal Energy Allocation Model Using Fuzzy Linear Programming for Energy Planning in India', International Journal of Energy Technology and Policy. Vol.5, Issue 4, pp.509 - 530.

5. Jebaraj S, Iniyan S, Suganthi L and Ranko Goic (2008), 'An Optimal Electricity Model for the Effective Utilisation of Energy Sources in India with Focus on biofuels', International Journal of Management of Environmental quality, Vol.19, Issue 4, 99. 480 – 486.

6. Syed Ameer Basha, Raja Gopal K and Jebaraj S (2009), 'A Review on Biodiesel Production, combustion, Emissions and Performance', International Journal of Renewable & Sustainable Energy Reviews, Vol.13, Issues 6-7, pp. 1628-1634.

7. Jebaraj S, Iniyan S and Goic R (2011),'Forecasting of Coal Consumption Using Artificial Neural Network and Comparison with Various Forecasting Techniques", International Journal of Energy Sources, Part A: Utilization and Environmental Effects. Vol. 33, Issue: 14, pp. 1305 – 1316.

8. Jebaraj S, Iniyan S and Goic R (2012), 'An Optimal Energy Allocation Model for Sustainable Resource Use in India', International Journal of Energy Research. Published online in Wiley Online Library (wileyonlinelibrary.com). DOI: 10.1002/er.2896.

9. S Jebaraj, P Srinivasa Rao (2015) 'High-efficiency solar oven for tropical countries', Arpn Journal of Engineering and Applied Sciences 10 (21), pp.10213-10217.

10. S Jebaraj, S Iniyan (2015) 'Oil demand forecasting for India using artificial neural network', International Journal of Global Energy Issues 38 (4-6), pp. 322-341.

11. P Srinivasa Rao, AFO Bawazir, M Awang, AMA Rani, S Jebaraj (2016) 'Effect of tool geometrical parameters on friction stir welding joint properties of aluminum alloy AA6061', ARPN Journal of Engineering and Applied Sciences 11 (22), pp.13053-13058.

12. PS Rao, P Ramachandran, S Jebaraj (2016) 'Models for selecting GMA Welding Parameters for Improving Mechanical Properties of Weld Joints', IOP Conference Series: Materials Science and Engineering 114 (1), 012027.

13. Jebaraj S. (2017) 'Electricity Demand Forecasting for Malaysia Using Artificial Neural Network', International Journal of Latest Engineering and Management Research (IJLEMR), Volume 02 - Issue 04, PP. 65-68.  www.ijlemr.com, ISSN: 2455-4847.

14. P. Srinivasa Rao, Abu Bakar Sidiq, Mokhtar Awang, F.M. Hashim and Jebaraj S (2017) 'Effect of Bevel Angles on Tensile Strength 2 of SS304 Steel Weld Joints', 2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering, Lecture Notes in Mechanical Engineering, Springer Nature Singapore Pte Ltd. 2017 (Book Chapter), Book ISBN: 978-981-10-4231-7, Chapter No. 8.

15. Ali Mubarak Al-Qahtani and Jebaraj S. (2019) 'Oil Demand Forecasting in Malaysia in Transportation Sector Using Artificial Neural Network', International Journal of Science and Engineering Invention, Volume 05, Issue 01, January 2019 | DOI: 10.23958/ijsei/vol05-i01/132, ISSN: 2455-4286.

16. Ali Mubarak Al-Qahtani and Jebaraj S. (2019) 'Experimental Investigation of the Performance of Vapour Compression Refrigeration System Using Various Refrigerants', RA JOURNAL OF APPLIED RESEARCH, Volume: 05 Issue: 03, DOI:10.31142/rajar/v5i3.06, ISSN: 2394-6709.

17. Jebaraj S. and Ali Mubarak Al-Qahtani (2019) 'Theoretical Investigation of the Performance of Vapour Compression Refrigeration System', International Journal of Latest Engineering and Management Research (IJLEMR), Volume 04 - Issue 03, PP. 01-07. www.ijlemr.com, ISSN: 2455-484.

18. S. Jebaraj and Ali Mubarak Al-Qahtani (2021) 'A review on solar flat plate collectors', Int. J. Global Energy Issues, Vol. 43, Nos. 2/3, pp. 114 – 134. (Scopus Indexed).

19. S. Jebaraj and Ali Mubarak Al-Qahtani (2021) 'A review on performance, heat transfer and exergy analysis of solar flat plate collectors', World Review of Science, Technology and Sust. Development, Vol. 17, Nos. 2/3, pp. 128 – 143. (Scopus Indexed).

• National Journal:

•  International Conference:

1. Wind Energy Programmes in India, International Conference on New Millennium Alternative Energy Solutions for Sustainable Development, PSG College of Technology, Coimbatore, 17 – 19 January 2003.

2. Hospital Solid Waste Management Systems, International Conference on Energy and Environmental Technologies for Sustainable Development, Malaviya National Institute of Technology, Jaipur, October 8 – 10, 2003.

3. Bio Energy Developments in India, International Conference on Energy and Environmental Technologies for Sustainable Development, Malaviya National Institute of Technology, Jaipur, October 8 – 10, 2003.

4. Sensitivity Analysis of the Optimal Energy Allocation Model (OEAM) Using Fuzzy Linear Programming for Energy Planning in India for the Year 2020, International Interdisciplinary Conference on Sustainable Technologies for Environmental Protection, Coimbatore Institute of Technology, Coimbatore, January 7-9, 2006.

5. Energy Models for Renewable Energy Utilization and to Replace Fossil Fuels, Proceedings of the 5th conference on energy conservation in Building, CIVILICA-Encyclopedia of Civil Engineering, Iran, June 2006.

6. An Optimal Electricity Allocation Model for the Effective utilization of energy Sources in India with Focus on Biofuels, 4th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, Crotia, June 4-8, 2007.

7. Energy Planning for India with Focus on Solar Based Electricity Generation, Proceedings of the 29th ISES Biennial Solar World Congress 2009, Johannesburg, South Africa, 11-14 October 2009, pp.1912, ISBN: 978-1-61738-852-1.

8. An Optimal Electricity Allocation Model for the Effective Utilisation of Energy Sources in India with Focus on Carbon Tax,  Proceedings of the 29th ISES Biennial Solar World Congress 2009, Johannesburg, South Africa, 11-14 October 2009, pp.2935 - 2939, ISBN: 978-1-61738-852-1.

9. Allocation Model Using Fuzzy Linear Programming for Energy Management in India, proceedings on international conference on Biomedical Instrumentation, Engineering and Environmental Management, 22nd-23rd, July 2011 held at Karpaga Vinayaga College of Engineering and Technology, Chennai.
   

• National Conference 
  

1. Photo-Voltaic Solar Energy Conversion, National Conference on Future Trends in Mechanical Engineering – Research and Development, Bharath Institute of Science and Technology, Chennai, 13 – 14 December 2002.

2. Solar Energy Programmes in India, National Conference on Future Trends in Mechanical Engineering – Research and Development, Bharath Institute of Science and Technology, Chennai, 13 – 14 December 2002.

3. Controlling of Centrifugal Pumps- A Review, One-Day seminar on Recent Developments in Design of Hydraulic Machines, Shri Angalamman College of Engineering and Technology, Tiruchirappalli, February 1, 2003.

4. Controlling of Positive Displacement Pumps- A Review, One-Day seminar on Recent Developments in Design of Hydraulic Machines, Shri Angalamman College of Engineering and Technology, Tiruchirappalli, February 1, 2003.

5. Design of Hydraulic Life without Compromise- a Review, One-Day seminar on Recent Developments in Design of Hydraulic Machines, Shri Angalamman College of Engineering and Technology, Tiruchirappalli, February 1, 2003.

6. Solar Thermal Energy Developments in India, One Day seminar on Recent Developments in Design of Hydraulic Machines, Shri Angalamman College of Engineering and Technology, Tiruchirappalli, February 1, 2003.

7. The Future Trend of e-Medicine: An Overview, National Conference on Innovations in Information and Communication Technology- NCIICT – 2003, PSG College of Technology, Coimbatore, pp 55- 58, March 7 – 8,2003.

8. Design of Hydraulic Controlled Gripper for a 3 D Robot, MOSSIM-2003, Annamalai University, Chidambaram, March 15-16,2003.

9. Concurrent Engineering: Pull Techniques – Design Management, National Conference on Modeling and Analysis of Production systems – MAPS 2004, National Institute of Technology, Tiruchirappalli, January 22 – 23, 2004.

10. Improved Chulhas Programmes in India, National Conference on Advancement in Electrical and Mechanical Engineering (NCAEME), Mailam Engineering College, Mailam, February 20 – 21, 2004, pp. 91 – 95.

11. Four – Legged Robot – An Overview, National Conference on Advancement in Electrical and Mechanical Engineering (NCAEME), Mailam Engineering College, Mailam, February 20 – 21, 2004, pp. 95 – 99.

12. Formulation of Forecasting Model for Wind Power in India, National Conference on Advances in Mechanical Engineering, S.V.U College of Engineering, Tirupati, 20 – 21, August 2004, pp. E59 – E61,

13. Forecasting of Conventional Energy Sources in India, National Conference on Energy Conservation & Policy Options for Small and Medium Scale Industries, PSG College of Technology, Coimbatore, 23 – 24, July 2004, pp.39 – 43.

14. Testing of diesel engine with bio-diesel, All India Seminar/ Conference on Advances in Mechanical Engineering, Sri Venkateshwara University, Thirupathi, August 20-21, 2004.

15.  Forecasting of Electricity Consumption in India using Artificial Neural Networks (ANN), National Conference on Advances in Mechanical and Production Engineering in the Era of Globalization, Tagore Engineering College, Chennai, 11 - 12 February 2005, pp.36.

16.  Optimization of Energy Resources Allocation Using Fuzzy Linear Programming, National Conference on Mechanical Engineering & Research NCMER 05, Bharath Institute of Higher Education & Research, Chennai, 28th February 2005,  pp. 270 – 277.

17.  Energy Demand Forecasting by Using Artificial Neural Networks, National Conference on Mechanical Engineering & Research NCMER 05, Bharath Institute of Higher Education & Research, Chennai, 28th February 2005, pp. 278 – 290.

18.  Forecasting of Coal Consumption in India using Artificial Neural Networks (ANN), National Conference on Mechanical Engineering & Research NCMER 05, Bharath Institute of Higher Education & Research, Chennai, 28th February 2005, pp. 388 – 397.

19.  Forecasting of Petroleum Consumption in India using Artificial Neural Networks (ANN), National Conference on Mechanical Engineering & Research NCMER 05, Bharath Institute of Higher Education & Research, Chennai, 28th February 2005, pp. 398 – 408.

20. Bio-diesel preparation and its performance testing, National Conference on Mechanical Engineering Research, Bharath Institute of Higher Education and Research, Chennai. 28th February 2005.

21. An Optimal Energy Planning Model using Fuzzy Linear programming for India, National Conference on Recent Trends in Thermal Engineering, Competative Manufacturing and Management, St. Joseph's college of Engineering, Chennai, 30th January 2007.
    

​Dr. Ahmad Jamal

• PhD: Mechanical Engineering, McGill University, Montreal, Canada, 2014
• MSc: Mechanical Engineering, King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia, 2003
• BSc: Mechanical Engineering, University of Engineering and Technology, Lahore, Pakistan, 1998
  

​Publications: 

​Dr. Elwaleed Awad Khidir

• ​PhD: Universiti Kebangsaan Malaysia
• MSc: Universiti Putra Malaysia
• BSc: University of Khartoum, Sudan
  

​Publications: 

Mr. ​Ibrahim Nuruddin Katsina

• PhD, Welding Engineering, Cranfield University, UK, 2012
• MSc, Welding Engineering, Cranfield University, UK, 2009
• BEng, Materials and Metallurgical Engineering, Ahmadu Bello University, Zaria Nigeria, 2004
  

• Other: Chartered Engineer (CEng)
  

​Publications: 

1. I.Nuruddin, S. Ganguly, D. Yapp, W. Suder and S. Willliams (2010), "Hybrid laser-arc pipe girth welding" The second south – east European IIW international congress
   

2. Ibrahim Nuruddin Katsina, Cranfield University "Simulation of heat affected zone structure and properties for pipe girth welding" IIW Document No. XI-E-1070-11 SIIW Sub-Commission XI-E "Transmission Pipelines" Intermediate Meeting, Old Kilpatrick, Glasgow, UK.
   

3. Ibrahim Nuruddin Katsina, Cranfield University "Understanding the effect of real thermal cycles on the heat affected zone metallurgical and mechanical properties in multi-pass welded pipeline steels" Pipeline Industries Guild, Young professional presentation competition (1st Prize Winner)
   

4. I.K. Nuruddin. (2014), "Laser Brazing of Nickel Super-Alloy Metal Foam to 304L Stainless Steel Plate", Nigerian Journal of Engineering.
   

5. I.Nuruddin, S. Ganguly, D. Yapp (2017), "Simulated CCT Diagram of the Heat Affected Zone of API-X65 pipeline steel with the aid of Dilatometric analysis" 70th IIW international conference, Shanghai, China.
   

6. I.Nuruddin, S. Ganguly, D. Yapp (2017), "The actual thermal cycles of a submerged arc weld heat affected zone on an API-X70 pipeline steel and its effect on the microstructure and mechanical properties" Materials Performance and Welding Technologies Conference, Dammam Saudi Arabia.
   

7. I.Nuruddin, S. Ganguly, D. Yapp (2017), "The issue of low toughness and the susceptibility of local brittle zones formation on the heat affected zone of API-X65 and X70 pipeline steels welds" Materials Performance and Welding Technologies Conference, Dammam Saudi Arabia.
   

8. Ibrahim, N.K. (2022). Thermal Simulation Applications in Welding Processes. In Fuad Khoshnaw (Ed.), Welding of Metallic Materials (Chapter 13), Elsevier. 
   

​Dr. Mir Md Maruf Morshed

• PhD: Mechanical Engineering, University of Adelaide, Australia (2008)
• MSc:
• BSc: Mechanical Engineering, Islamic University of Technology, Bangladesh (2001)
  

​Publications: 

1. Mir Md Maruf Morshed, "Limitations of the Asymptotic Equations for Exterior Sound Waves", SAGE Journals, Noise and Vibration Worldwide, Vol. 53, Issue 9-10, pp. 439-453, 21 September 2022. https://doi.org/10.1177/09574565221128070

2. Md. Amin Mahmud, Md. Shahriar Islam, Md. Zahid Hossain, and Mir Md Maruf Morshed, "A Comparative Study of Different Helmholtz Resonator Systems", Canadian Acoustics, Vol. 44, No. 4, December 2016, pp. 12-17.
   https://jcaa.caa-aca.ca/index.php/jcaa/article/view/2866

3. Mir Md. Maruf Morshed, Colin H. Hansen and Anthony C. Zander, "Prediction of Acoustic Loads on a Launch Vehicle: Non-unique Source Allocation Method", Journal of Spacecraft and Rockets (JSR), Vol. 52, No. 5, September 2015, pp. 1478-1485.
   https://doi.org/10.2514/1.A33204

4. Md. Amin Mahmud, Md. Shahriar Islam, Md. Zahid Hossain, and Mir Md Maruf Morshed, "Improvement of Noise Attenuation in a Duct Using Two Helmholtz Resonators",  International Review of Mechanical Engineering (I.RE.M.E.), Vol. 9, No. 3, May 2015, pp. 231-236. https://doi.org/10.15866/ireme.v9i3.5596

5. Md. Shahriar Islam, Md. Zahid Hossain and Mir Md Maruf Morshed, "Dynamic Response of a Simply Supported Plate Due to Excitation at Different Points", International Journal of Advancements in Mechanical and Aeronautical Engineering (IJAMAE), Vol. 2, Issue 1, 30 April 2015, pp. 73-81.
   https://www.seekdl.org/search?q=Dynamic+Response+of+a+Simply+Supported+Plate+Due+to+Excitation+at+Different+Points&criteria=journal&category=paper-title

6. Md. Amin Mahmud, Md. Zahid Hossain, Md. Shahriar Islam and Mir Md Maruf Morshed, "Noise Attenuation by Two One Degree of Freedom Helmholtz Resonators", Global Science and Technology Journal, Vol. 3, No. 1, March 2015, pp. 1-9.http://www.gstjpapers.com/previous_issue/March/2015

7. Mir Md Maruf Morshed, Colin H. Hansen, and Anthony C. Zander,   "Estimation of acoustic loads on a launch vehicle fairing", Journal of the Acoustical Society of America, Vol. 136, No. 4, October 2014. https://doi.org/10.1121/1.4899703

8. Mir Md Maruf Morshed "Prediction of Exterior Sound Pressure Field of a Cylinder Using the Boundary Element Method", Procedia Engineering, Vol. 56, May 2013, pp. 857-863. https://doi.org/10.1016/j.proeng.2013.03.207

9. Mir Md Maruf Morshed, Colin H. Hansen and Anthony C. Zander, "Prediction of Acoustic Loads on a Launch Vehicle Fairing During Lift-off", Journal of Spacecraft and Rockets (JSR), Vol. 50, No. 1, January 2013, pp. 159-168.
   https://doi.org/10.2514/1.A32324

10. Mir Md Maruf Morshed, Anthony C. Zander, and Colin H. Hansen, "Two-Dimensional and Three-Dimensional Acoustic Loadings on Cylinders Due to a Point Source", Journal of American Institute of Aeronautics and Astronautics (AIAA), Vol. 49, No. 11, November 2011, pp. 2421-2429. https://doi.org/10.2514/1.A33204

11. Md. Amin Mahmud, Md. Zahid Hossain, Md. Shahriar Islam and Mir Md Maruf Morshed, "Noise Attenuation by Two One Degree of Freedom Helmholtz Resonators", 10th Global Engineering, Science and Technology (GIST), 2-3 January 2015, Dhaka, Bangladesh.
    https://gistworldconpro.com/uploads/3/3/1420110906_202-mahmud.pdf

12. Md. Shahriar Islam, Md. Zahid Hossain and Mir Md Maruf Morshed, "Dynamic Response of a Simply Supported Plate Due to Excitation at Different Points", Second International Conference on Advances in Mechanical, Aeronautical and Production Techniques-MAPT, 20-21 Dec. 2014, Kuala Lumpur, Malaysia.
    https://www.seekdl.org/conferences-details.py/188

13. Mir Md Maruf Morshed, Colin H. Hansen, and Anthony C. Zander,   "Estimation of acoustic loads on a launch vehicle fairing", Proceedings of 168th  Meeting of the Acoustical Society of America, Indianapolis, 27-31 October 2014, USA.
    http://acousticalsociety.org/sites/default/files/docs/Tuesday_1.pdf

14. Mir Md Maruf Morshed "Prediction of Exterior Sound Pressure Field of a Cylinder Using the Boundary Element Method", Proceedings of the 5th Bangladesh Society of Mechanical Engineers- International Conference on Thermal Engineering (5th BSME-ICTE), 21-23 December 2012, Bangladesh.

15. Mir Md Maruf Morshed, Colin H. Hansen, and Anthony C. Zander, "Sound Pressure Field Due to Obliquely Incident Waves on a Cylinder", Proceedings of the 18th International Congress of Sound and Vibration (ICSV18), Vol. 1, 10-14 July 2011, Rio De Janeiro, Brazil, pp. 318-324.https://mecheng.adelaide.edu.au/avc/publications/abstract.php?abstract=1272

16. Mir Md Maruf Morshed, Anthony C. Zander, and Colin H. Hansen, "Sound Pressure at the Surface of a Cylinder Due to a Point Source", Proceedings of the 13th Asian Congress of Fluid Mechanics (13 ACFM), 17-21 Dec. 2010, Bangladesh, pp. 212-215.https://mecheng.adelaide.edu.au/avc/publications/abstract.php?abstract=1012

​Mr. Mohamed Elshabasy

• ​PhD: Aerospace Engineering, ODU, VA, USA. 2009
• MSc: Mechanical Engineering, Alexandria University, Egypt. 2001
• BSc: Mechanical Engineering, Alexandria University, Egypt. 2009

​Publications:

1. SA Kouritem, MMYB Elshabasy, "Tailoring the panel inertial and elastic forces for the flutter and stability characteristics enhancement using copper patches Composite Structures 274, 114311, 2021. https://doi.org/10.1016/j.compstruct.2021.114311 https://www.sciencedirect.com/science/article/abs/pii/S026382232100773X

2. MMYB Elshabasy, MA Al-Moghazy, HA El Gamal, "Investigation of the enhancement of microelectromechanical capacitive pressure sensor performance using the genetic algorithm optimization techniqueEngineering Optimization 53 (1), 1-17, 2021. https://doi.org/10.1080/0305215X.2019.1694673 https://www.tandfonline.com/doi/abs/10.1080/0305215X.2019.1694673

3. MMYB Elshabasy, SA Kouritem, "Thickening of optimally selected locations on panels subjected to unyawed flow for substantial delay of the panel flutter," Alexandria Engineering Journal 59 (6), 5031-5044, 2020. https://doi.org/10.1016/j.aej.2020.09.026 https://www.sciencedirect.com/science/article/pii/S1110016820304828

4. MMYB Elshabasy, KT Mohamed, AA Ata, "Power optimization of planar redundant manipulator moving along constrained-end trajectory using hybrid techniques," Alexandria Engineering Journal 56 (4), 439-447, 2017. https://doi.org/10.1016/j.aej.2017.01.040 https://www.sciencedirect.com/science/article/pii/S1110016817300571

5. MMYB Elshabasy, "Augmentation of classical failure criteria for comprehensive applicability to interfacially deficient woven-roving composites," Journal of Composite Materials 50 (11), 1483-1496, 2016. https://doi.org/10.1177/0021998315593796 https://journals.sagepub.com/doi/abs/10.1177/0021998315593796
   

6. SA Kouritem, MMYB Elshabasy, HA El-Gamal,"FE Meshing Scheme for Accurate Placement/Area of PZT Actuators for Flutter Damping Using LQR Method," The 2015 World Congress on Advances in Structural Engineering and Mechanics (ASEM15), Incheon, South Korea, 2015. http://www.i-asem.org/publication_conf/asem15/1.ISEM15/3f/F2H.5.SM136_1520F1.pdf

7.  SA Kouritem, MMYB Elshabasy, HA El-Gamal, "Optimum Location/Area of PZT Actuators for Flutter Damping Using Norm Feedback Control Gain-Based Iterative Method," The 2015 World Congress on Advances in Structural Engineering and Mechanics (ASEM15), Incheon, South Korea, 2015. http://www.i-asem.org/publication_conf/asem15/1.ISEM15/1w/W4A.5.SM109_1519F1.pdf

8.  MMYB Elshabasy, "Validating the Classical Failure Criteria for Applicability to the Notched Woven-Roving Composite Materials," Journal of Composites 2014, Volume 2014, Article ID 329153, 12 pages, Hindawi Publishing Corporation, 2014. doi: 10.1155/2014/329153 https://downloads.hindawi.com/archive/2014/329153.pdf

9.  MMYB Elshabasy, Y Yoon, A Omran, "Designing stipulated gains of aircraft stability and control augmentation systems for semiglobal trajectories tracking," ISRN Aerospace Engineering, Volume 2014, Article ID 409408, 10 pages, Hindawi Publishing Corporation. https://doi.org/10.1155/2014/409408 https://downloads.hindawi.com/archive/2014/409408.pdf

10. A Omran, M Elshabasy, "A note on the inverse dynamic control of parallel manipulators," Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. (224), Issue (1), PP 25-32, SAGE Publications, 2010. https://doi.org/10.1155/2014/409408, https://www.hindawi.com/journals/isrn/2014/409408/

11.  M Elshabasy, M Abouelwafa, A Hamdy, A Elmidany," Comparison between inclusions and holes as stress raisers in composite materials used in wind turbine components," 5th AIAA Aerospace Sciences Meeting and Exhibit, 08 January 2007 - 11 January 2007, Reno, Nevada, AIAA 2007-819. https://arc.aiaa.org/doi/pdfplus/10.2514/6.2007-819. https://doi.org/10.2514/6.2007-819 https://arc.aiaa.org/doi/abs/10.2514/6.2007-819
    

12.  M Elshabasy, B Newman," Mean Stress Effect on Optimal Overload for Crack Mitigation in Aircraft Panels," 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 1-4 May 2006, Newport, Rhode Island.https://doi.org/10.2514/6.2006-1650, https://arc.aiaa.org/doi/10.2514/6.2006-1650
    

13. M Elshabasy, B Newman, S Yu," Underload Injection Effect on Optimal Overload Values for Crack Growth Retardation," 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference,01 May 2006 - 04 May 2006, Newport, Rhode Island. https://doi.org/10.2514/6.2006-1649, https://arc.aiaa.org/doi/10.2514/6.2006-1650
    

​Dr.Syed Ameer Basha

• ​PhD: Jawaharlal Nehru Technological University
• M.Tech: Jawaharlal Nehru Technological University
• B.Tech: Jawaharlal Nehru Technological University
  

​Publications: 

​Dr. Bagas Wardono

• Ph.D., Industrial Engineering, North Carolina State University, USA
• MSc, Mechanical Engineering, Iowa State University, USA
• BSc, Mechanical Engineering, Institut Teknologi Sepuluh Nopember, Indonesia

​Publications:

​Dr. Mohammed Yahaya Khan

• ​PhD: Mechanical Engineering
  

List of papers presented in International conferences

1. Mohammed Yahaya Khan, Z.A.Abdul Karim, A. Rashid A. Aziz, "Experimental Investigation of Performance and Emission Characteristics of an IDI Diesel Engine Using Homogenized Water in Diesel Emulsion", International Conference on Green Manufacturing: Analytics, Automation, Processes, Products, Energy, & Structures (GM: AAPPES 2018), Rajalakshmi Engineering College, Chennai, 28th & 29th March 2018.
   

2.  Mohammed Yahaya Khan, Z.A.Abdul Karim, A. Rashid A. Aziz, M R Heikal, C. Crua, "Puffing and Microexplosion Behaviour of Parent-Child Droplets of Water in Pure Diesel Emulsion during Leidenfrost Effect" at the 27th European Conference on Liquid Atomization and Spray Systems, 4-7 September 2016 at University of Brighton.  United Kingdom.

3.  Z. A. Abdul Karim, Muhammad Hafiz Aiman, Mohammed Yahaya Khan "Efficacy of Water-in-Diesel Emulsion to Reduce Exhaust Gas Pollutants of Diesel Engine" 5th International Conference on Production, Energy and Reliability 2016 (ICPER 2016), Kuala Lumpur Convention Centre, Malaysia from 15-17 August 2016.

4.   Mohammed Yahaya Khan, Z.A. Abdul Karim and A. Rashid. A. Aziz,  "An Experimental Investigation of Microexplosion in Biofuel Emulsion" 5th International Conference on Production, Energy and Reliability 2016 (ICPER 2016), Kuala Lumpur Convention Centre, Malaysia from 15-17 August 2016.
   

5.  Z. A. Abdul Karim, Mohammed Yahaya Khan, A. R. A. Aziz, and I. M. Tan, "Characterization of Water in Diesel Emulsion", 4th International Conference on Production, Energy and Reliability (ICPER2014), Kuala Lumpur Convention Centre, Malaysia on 3-5 June 2014."Published in MATEC Web of Conferences", vol. 13, p. 02006, (2014).

6.  Mohammed  Yahaya khan, Z. A. Abdul Karim, A. R. A. Aziz, and I. M. Tan, "Performance and Emission Assessment of Multi Cylinder Diesel Engine using Surfactant Enhanced Water in Diesel Emulsion", 4th International Conference on Production, Energy and Reliability (ICPER2014), Kuala Lumpur Convention Centre, Kuala Lumpur, Malaysia on 3-5 June 2014. "Published in MATEC Web of Conferences", vol.13, p. 02025 (2014).

7.  Mohammed Yahaya Khan, Z.A.Abdul Karim, A. R .A. Aziz and Isa M Tan,  " Experimental Study on  Influence of Surfactant Dosage on Micro Explosion occurrence in Water in Diesel Emulsion", 7th  International Meeting on advances in thermos fluid  (IMAT-2014), 26-27 November-2014, Kuala  Lumpur.

8.  Mohammed Yahaya Khan, Z.A.Abdul Karim, A. R .A. Aziz and Isa M Tan, "A Case Study on Preparation, Stability and Physical Properties of Water in Diesel Emulsion" UTP-UMP Symposium on Energy Systems (SES) 2015, 7th  October at Universiti Teknologi Petronas, Seri Iskandar, Perak, Malaysia.

9.  Mohammed Yahaya khan, "Steady State And Transient Thermal Analysis of Electrical Machines Using FEA-A Case Study on Switched Reluctance Motor", Proceedings of National Conference on Emerging Trends in Thermal Engineering, Competitive manufacturing and Management, TECM 2005, St. Joseph's College of Engineering College, Chennai, between January 24th & 25th 2005.

10.  Mohammed Yahaya Khan and Murugarajan A. "A Simulation Model of Voice Recognition Articulate Robot" Proceedings of the first National Conference on Development and Challenges in Manufacturing Engineering – 2004, P. No. 294-300. Manipal Institute of               Technology, Karnataka, March 18-20, 2004.
    

List of papers published in journals

1. M. Yahaya Khan, Z. Abdul Karim, F. Y. Hagos, A. R. A. Aziz, and I. M. Tan, "Current Trends in Water-in-Diesel Emulsion as a Fuel," The Scientific World Journal, vol. 2014, 2014.

2. M. Y. Khan, Z. A. Abdul Karim, A. R. A. Aziz, and I. Tan, "Experimental Investigation of Micro Explosion Occurrence in Water in Diesel Emulsion Droplets during Leidenfrost Effect," Energy & Fuels 2014 28 (11), 7079-7084.

3. Mohammed Yahaya Khan, Z.A.Abdul Karim, A. R .A. Aziz and Isa M Tan,  " Experimental Study on Influence of Surfactant Dosage on Micro Explosion occurrence in Water in Diesel Emulsion", Applied Mechanics and Materials 819(2016): pp 287-291, December 2015)

4. Mohammed Yahaya Khan, Z.A.Abdul Karim, A. R .A. Aziz and Isa M Tan, "A Case Study on Preparation, Stability and Physical Properties of Water in Diesel Emulsion", Journal of Engineering and Applied Sciences 10(22):17289-17293 · December 2015.

5. M. Y. Khan, Z. A. Karim, A. R. A. Aziz, and I. M. Tan, "A Case Study on the Influence of Selected Parameters on Microexplosion Behavior of Water in Biodiesel Emulsion Droplets," ASME. J. Energy Resour. Technol. 2016;139(2):022203-022203, 2017.

6.  Z. A. Abdul Karim, Muhammad Hafiz Aiman, Mohammed Yahaya Khan "Efficacy of Water-in-Diesel Emulsion to Reduce Exhaust Gas Pollutants of Diesel Engine" ARPN Journal of Engineering and Applied Sciences, 2016 11(24),14284-14289.

7.   Mohammed Yahaya Khan, Z.A. Abdul Karim and A. Rashid. A. Aziz, "An Experimental Investigation of Microexplosion in Biofuel Emulsion" ARPN Journal of Engineering and Applied Sciences, 2016 11(24), 14303-14307.

8.  Mohammed Yahaya Khan, Z.A. Abdul Karim and A. Rashid. A. Aziz, "Puffing and Microexplosion Behaviour of Water in Pure Diesel Emulsion droplets during Leidenfrost Effect", Combustion Science and Technology, 2017 189 (7), 1186–1197.

9.  Z. A. A. Karim and M. Y. Khan, "Experimental Investigation of Performance and Emission Characteristics of IDI Diesel Engine Using Homogenized Water in Bio-Diesel Emulsion," MATEC Web Conf., vol. 225, p. 04022, 2018.

10.  Z. A. A. Karim, D. Tee, M. Y. Khan, and F. Y. Hagos, "Investigation of Water-in-Biodiesel Emulsion Characteristics Produced by Ultrasonic Homogenizer," MATEC Web Conf., vol. 225, p. 01012, 2018.

11.  Mohammed Yahaya Khan, Z. A. Abdul Karim & A. Rashid A. Aziz, "Experimental investigation of performance and emission characteristics of an IDI diesel engine using homogenized water in diesel emulsion", International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), Vol. 8, Issue 3, Jun 2018, 933-942.

12.  Z. A. Karim, M. Y. Khan, and A. R. A. Aziz, "Evolution of Microexplosion Phenomenon in Parent–Child Droplets of Water in Biodiesel Emulsions Enhanced by Different Surfactant Dosages and Hydrophilic–Lipophilic Balance Values," Journal of Energy Resources Technology, vol. 141, p. 102204, 2019.

13.  Z. A. Abdul Karim, Mohammed Yahaya Khan, A. Rashid A. Aziz and Ftwi Y. Hagos, "Attaining simultaneous reduction in NOx and smoke by using water-in-biodiesel emulsion fuels for diesel engine", PLATFORM Journal of Engineering, Volume 3  NO 2  2019  e-ISBN: 26369877.

14.  Zainal Ambri Abdul Karim, Eesha Kaur, Syed Muhammad Syed Masharuddin, Mohammed Yahaya Khan, Ftwi Y. Hagos, "The characteristics of water-in-biodiesel emulsions produced using ultrasonic homogenizer", Alexandria Engineering Journal, Volume 59, Issue 1, February 2020, Pages 227-237. 
    

​Mr. Aqeel Alalwan

• ​MSc: Mechanical Engineering, The University of Tulsa, Oklahoma, USA

• BSc: Mechanical Engineering, Jubail University College, Jubail, KSA
  

Publications:

​Mr. Muhammed ALayyash

• ​MSc: NDT and evaluation engineering
• BSc: applied mechanical engineering 
  

​Publications:

​Mr. Abdullah Alqahtani

• ​MSc: Industrial System Engineering; University of Regina, 2019

• BSc: Mechanical engineering technology

• Other: Certified level 3 ASNT
  

Publications:

• An automating interpretation of industrial radiographic digital images used in nondestructive testing, August 2019, SAE International Journal of Materials and Manufacturing 14(2)

• Qahtani F. Abdullah," Reducing Waiting Time at Outpatient Clinics Using Six Sigma Methodology and Discrete Event Simulation". 2017. UofR. SK.Canada

​Mr. Sami Alatawi

• ​MSc: Florida International University 
• BSc: Tabuk University

• Other: PGCertHE
  

​Publications: 

​Mr. Thamer Albaijan

• ​MSc: Eastern Kentucky University
• BSc: Eastern Kentucky University

​Publications: 

​Mr. Muhammad Salim Janjua

• ​MSc: Mechanical Engg. University of Engg. & Tech. Lahore Pakistan. 1995

• BSc: Mechanical Engg. University of Engg. & Tech. Peshawar. 1986

• Other: INDEXTRAC University of Philippines
  

​Publications:

​Mr. Majed Ahmad Hammad

• ​MSc: Mechanical Engineering

• BSc: Mechanical Engineering
  

​Publications: 

Mr. ​Salman Abdul Gaffar

• ​M.S in Mechanical Engineering

• B.E in Mechanical Engineering specialization in production
  

​publications: 

​Mr. Nauman Javed

• ​MSc Thermal Power Engineering, University of Engineering & Technology, Lahore, Pakistan, 2012

• BSc Mechanical Engineering, University of Engineering & Technology, Lahore, Pakistan, 2004
  

​Publications:

Javed N., "Solar-powered Stirling engine; A supplementary source of power generation for Pakistan", Pakistan Energy Options: Availability and Affordability, Role of Regional Grids, 2012, Islamabad.

​Mr. Osman Muse

• ​MSc: Imperial College, (London University) UK.

• BSc: South Bank University, UK

• Other: Diploma in Corrosion of Engineering material, UK.
  

​Publications: 

Mr. ​Farhan Hamid 

• ​MSc Mechanical Engineering: King Fahd University of Petroleum and Minerals Dhahran KSA,2000
• BSc Mechanical Engineering : University of Engineering and Technology Lahore Pakistan , 1996
  

Publications:

Machinability of Kevlar® 49 Composite Laminates While Using Standard TiN Coated HSS Drills ; Machining Science and Technology An International Journal Volume 8, 2004 - Issue 3.

​Mr. Fouad Zayadin

• ​MSc: Materials and Metallurgical Engineering; Balqa Applied University, Jordan, 2006
• BSc: Materials and Metallurgical Engineering; Balqa Applied University, Jordan, 2002
  

• Other: Certified level 3 ASNT
  

Phone: 2257

Building: Academic Building

Office: 119

Email: jayah_h@rcjy.edu.sa

​Area of Expertise:

Thermal engineering, renewable energy.

Phone: 2261

Building: Wing 1

Email: Suheel_md@rycj.edu.sa

​Area of Expertise:

Air Conditioning and Refrigeration.

Phone:

Building: ETA Building

Office#: 191

Email: mohiuddinm@rcjy.edu.sa

​Area of Expertise:

 Design, CAD/CAM/CAE, RP & RE.

​

Position: Instructor

Phone: 013-340-2456

Building: Academic wings

Office: 127

Email: Osaimi_b@rcjy.edu.sa

Area of Expertise:

Maintenance management, Reliability Engineering, Industrial Rotating Equipment, Fluid Mechanics, Applied Mechanics, and Applied Thermodynamics.

​Position: Instructor

Phone: 3049

Building: Academic

Office: 309 wing 3

Email: hydri_s@RCJY.edu.sa   

Area of Expertise:

Mechanical engg subjects industrial Pumps, compressors, Diploma projects, Airconditioning, Autocad, and engineering drawing.

Phone: 2485

Building: E T A

Office: 320

Email: alshehri_aa@RCJY.EDU.SA

​Area of Expertise:

Position: Instructor

Phone: 2594

Building: Wing 3

Office: 318

Email: Shekh_aa@rycj.edu.sa

​Area of Expertise: 

Mechanical Maintenance and Project Engineering

Position: Instructor

Phone:+966133402053

Building: Mechanical Engineering

Office: 404

Email: Dossari_h@rcjy.edu.sa

​Area of Expertise:

 Mechanical Engineering.

​Mr. Husam Siddiq Al Sini

• ​BSc: Mechanical Maintenance Engineering

​Publications: 

​Mr. Turki Al-Ati

• ​BSc: Jubail Industrial College

​Publications: 

​Mr. Fares K. Yousef

• ​BSc: Mech. Engineering
  

​Publications:

​Mr. Jomon C George

• ​Diploma in Mechanical Engineering.
• ASNT NDT Level III certifications in
• Penetrant Testing, Magnetic Particle Testing, Ultrasonic Testing & Visual Testing
• NDT Level II certifications in Phased Array Ultrasonic Testing, Time of Flight Diffraction. Eddy Current Testing & Radiography Testing
  

​Publications: 

​Mr. Mohammad Abu Touq

• ​BSc: Engineering Tech.
• Other: Specialized engineering courses
  

​Publications: 

​Mr. Osama Khaled Antar

• BSc: Mechanical Engineering, Miskolc University, 1991​

​Publications:

​Mr. Bandar Saud Al-Muqati

• BSc:Jubail Industrial College, 2007​
  

​Publications:

​Mr. Ahmad Al-Shehri

• ​​AS Mechanical Maintenance Engineering Technology
  

​​Publications:

Mr. ​Anas I. Alsouwilem 

• ​BS (Mechanical Engineering Technology) Jubail Indu​strial College, Saudi Arabia,2009

​publications: 

​Mr. Badr Abdulaziz Al Motairi

• ​AS in Manufacturing Engineering
  

​Publications: 

Mr. Khaled A. Al-Amer

​Area of Expertise:

Non-Destructive Testing, Mechanical Engineering. 

Phone:

Building: Wing 3

Office:

Email: Garnis@rcjy.edu.sa

​Area of Expertise:

Material science, Manufacturing Process & Senior project.

Phone: 2027

Building: Academic Building

Office: 102

Email: Ohali_k@rcjy.edu.sa

​Area of Expertise: